Search results
1 – 10 of 12Behnam Abdollahi, Daryoush Afzali and Zahra Hassani
SiO2 and SiO2-ZrO2 nanocomposites were coated by sol–gel dipping method on carbon steel 178 (178 CS). Nanostructure and phase properties of nanocomposite coating were…
Abstract
Purpose
SiO2 and SiO2-ZrO2 nanocomposites were coated by sol–gel dipping method on carbon steel 178 (178 CS). Nanostructure and phase properties of nanocomposite coating were characterized using X-ray diffraction, scanning electron microscopy and Fourier transform infrared studies. Electrochemical polarization and electrochemical impedance spectroscopy (EIS) tests were used to study the corrosion behavior of 178 CS that was coated with SiO2-ZrO2 nanocomposite and SiO2 coating in 3.5 per cent NaCl solution. The results indicated that SiO2-ZrO2 nanocomposite coating performed better in terms of corrosion resistance compared with SiO2 coating. The corrosion resistance of SiO2-ZrO2 nanocomposite coating could be increased significantly in by approximately three and seven times of that of SiO2 coating and bare 178 CS, respectively.
Design/methodology/approach
SiO2 and SiO2-ZrO2 nanocomposites were coated using sol–gel dipping method on carbon steel 178. Electrochemical polarization and EIS tests have been used to study the corrosion behavior of 178 CS that was coated with SiO2-ZrO2 nanocomposite and SiO2 coating in 3.5 per cent NaCl solution.
Findings
Results indicated that SiO2-ZrO2 nanocomposite coating performed better in terms of corrosion resistance compared with SiO2 coating. The corrosion resistance of SiO2-ZrO2 nanocomposite coating could be increased significantly in by approximately three and seven times of that of SiO2 coating and bare 178 CS, respectively.
Originality/value
The SiO2-ZrO2 nanocomposite coating film showed significant improvement in corrosion resistance of 178 CS. The highest polarization resistance of the nanocomposite coating film was 10,600 Ω/cm2 from SiO2-0.2 ZrO2.
Details
Keywords
Mansoureh Parsa, Seyed Mohammad Ali Hosseini, Zahra Hassani and Effat Jamalizadeh
The purpose of this paper was to study the corrosion resistance of water-based sol-gel coatings containing titania nanoparticles doped with organic inhibitors for corrosion…
Abstract
Purpose
The purpose of this paper was to study the corrosion resistance of water-based sol-gel coatings containing titania nanoparticles doped with organic inhibitors for corrosion protection of AA2024 alloy.
Design/methodology/approach
The coatings were obtained using tetraethylorthosilicate, 3-glycidoxypropyltrimethoxysilane, titanium (IV) tetrapropoxide and poly(ethylene imine) polymer as cross-linking agents. As corrosions inhibitors, 2-mercaptobenzoxazole and salicylaldoxime were incorporated into the sol-gel for the improvement of the corrosion resistance. The corrosion protection performance of coatings was studied using the potentiodynamic scan and the electrochemical impedance spectroscopy (EIS) methods. Atomic force microscopy was used to investigate surface morphology of the coatings.
Findings
The results indicated that doping the sol-gel coatings with inhibitors leads to improvement of the corrosion protection. The comparison of doped coatings confirmed that corrosion protection performance of the sol-gel coatings doped with 2-mercaptobenzoxazole was better than for the sol-gel coatings doped with salicylaldoxime. Also the EIS results verified self-healing effects for the sol-gel coatings doped with 2-mercaptobenzoxazole.
Originality/value
This paper indicates 2-mercaptobenzoxazole and salicylaldoxime can be added as corrosion inhibitors to sol-gel coatings to improve their corrosion protective properties for AA2024 alloy.
Details
Keywords
Marieh Khorraminia, Zahra Lesani, Mahdi Ghasvari, Lila Rajabion, Mehdi Darbandi and Alireza Hassani
Nowadays, communications, products, services and costs are customized through the internet technology. The main theory to continue competitiveness in the organizations is customer…
Abstract
Purpose
Nowadays, communications, products, services and costs are customized through the internet technology. The main theory to continue competitiveness in the organizations is customer relationship management (CRM). CRM enables organizations to efficiently interact with customers and gather, store and examine their data for providing a complete view of them. On the other hand, the subject of cloud computing has increasingly become the bridge for the success of the CRM implementation. Therefore, this study aims to investigate the impact of cloud computing (new cloud facility, knowledge of information technology (IT), cloud security and cost) on the success of CRM systems.
Design/methodology/approach
The model and the questioners-based data are analyzed using the Smart PLS 3.0. The data were gathered based on 80 employees of three main agricultural companies in Iran.
Findings
The obtained results have indicated that all of the considered factors, new cloud facilities, knowledge of IT, cloud security and cost, play an important role in CRM systems’ success. Also, the evaluation and examination of the consistency and validity of the model are performed through the structural equation model.
Research limitations/implications
First, the authors have conducted a study in a single region. It cannot be guaranteed that the results can be generalized to other regions. Second, for this cross-sectional study, the research design was conducted that showed constant relationships between variables. The research done for this study is cross-sectional. Third, because of time and financial restrictions, the authors have gathered data using a sample from a single location.
Originality/value
Proposing a new model for investigating of the impact of cloud computing (new cloud facility, knowledge of Information Technology (IT), cloud security and cost) on the success of CRM systems is the main originality of this paper.
Details
Keywords
Zahra Goodarzvand Chegini, Hessam Hassani, Ali Torabian and Seyed Mehdi Borghei
This paper aims to study peroxymonosulfate (PMS) activation in the ultraviolet (UV)/ozone process for toxic cyanide degradation from aqueous solution by a novel and simple method.
Abstract
Purpose
This paper aims to study peroxymonosulfate (PMS) activation in the ultraviolet (UV)/ozone process for toxic cyanide degradation from aqueous solution by a novel and simple method.
Design/methodology/approach
Photocatalytic degradation of cyanide (CN-) was carried out using a bench-scale photoreactor. Optimization of the UV/ozone process for the highest removal of cyanide was obtained. The effect of parameters such as ozone concentration, PMS concentration, temperature, cations (Cu2+, Co2+ and Fe2+), cyanide concentration, anions (bicarbonate, carbonate, chloride, nitrite, nitrate and sulfate [SO42−]) and scavengers (ethanol [EtOH], humic acid, TBA and NaN3) was investigated for CN- degradation.
Findings
Complete removal of 50 mg/L cyanide was obtained in 4 min in an ozone/UV/PMS process. The cyanide removal increased from 49.3% to 100% by adding the persulfate dosage up to 100 mg/L. The effect of various cations (II) on the cyanide degradation was enhanced in the order Cu2+ > Co2+ > Fe2+. Hydroxyl radical based on different radical quenchers such as salicylic acid proved as the main oxidizing radical for oxidation. The application of ozone/UV/PMS to treat wastewater containing cyanide shows high degradation efficiency.
Research limitations/implications
The ozone/UV/PMS system could be a process for degradation and detoxification of cyanide.
Practical implications
This study provided a simple and effective method for degradation of cyanide from aqueous solution. This method was applicable to protect environment from a huge amount of toxic cyanide wastewater produced by different industrial processes.
Originality/value
The PMS activation is done via a simple and effective method, which is carried out with the ozone/UV system. There are two main innovations. One is that the novel catalytic role of bimetallic ions in the ozone reaction with cyanide and the further decomposition of intermediate products is investigated. The other is that the optimized conditions were obtained for the removal of cyanide as a water contaminant. Furthermore, predominant oxidizing species by PMS activation are identified.
Details
Keywords
Ahmad Alrazni Alshammari, Othman Altwijry and Andul-Hamid Abdul-Wahab
From 1979 to 2023, the takaful structure has been adopted in many jurisdictions, making the documenting of its early days of establishment relatively difficult and somewhat…
Abstract
Purpose
From 1979 to 2023, the takaful structure has been adopted in many jurisdictions, making the documenting of its early days of establishment relatively difficult and somewhat unreliable. This is unlike conventional insurance, where the history and legislation are well documented and archived in various research (Hellwege, 2016; Marano and Siri, 2017). The purpose of this paper is to provide a chronology for the establishment and development of takaful via the takaful establishment in each jurisdiction, documenting its first takaful operator and first takaful regulation.
Design/methodology/approach
This paper has used a qualitative method in the form of reviewing literature and available data such as journals, books and official resources. The data is thoroughly analysed in order to build the chronology for takaful. It adopted an exploratory research design, which is deemed suitable in situations where few works of literature have examined the subject (Neuman, 2014). The paper explores the establishment and non-establishment of takaful in 57 countries. The paper categorises the countries into seven regions starting with the GCC, Levant, Asia, Central Asia, Africa, Europe and Others.
Findings
The takaful chronology presented in this paper shows that takaful operations exist in 47 jurisdictions, starting from Sudan and the UAE in 1979, with the most recent adopters being Morocco and Iran in December 2021. It is found that 22 jurisdictions do not have takaful regulations, and the Takaful Act 1984, issued in Malaysia, is considered the first takaful regulation that sets the basis for other regulations that follow.
Originality/value
The paper contributes to the literature by providing a comprehensive chronology of takaful, especially as the few existing timelines have been found to be incomplete and consist of contradictory information.
Details
Keywords
Ichiro Tsuchimoto and Yuya Kajikawa
This study investigates competitive intelligence (CI)-related practices in companies, including process, scope and organizational structure. As these aspects have not been…
Abstract
Purpose
This study investigates competitive intelligence (CI)-related practices in companies, including process, scope and organizational structure. As these aspects have not been sufficiently discussed in the literature, the study objective is to determine (1) the type of CI process being employed, (2) whether the CI scope is limited to competitor analysis or spans a broader business environment and (3) whether the CI process and scope vary depending on organizational CI.
Design/methodology/approach
An interview was conducted at two types of Japanese companies: one established a CI department to implement CI, whereas the other did not establish a CI department and conducted CI in an ad hoc manner. Multicase studies were performed to examine companies with different organizational structures.
Findings
The CI scopes included a broad range of factors (e.g. technology, customers, markets, suppliers, economy, society, politics, legislation and regulation), and not only competitor analysis. An established CI department did not guarantee a well-organized CI process. Furthermore, the lack of such a department did not preclude systematic CI processes or activities.
Originality/value
The authors classified the CI in the companies the authors inspected as either systematic (organized CI) or ad hoc (unorganized CI) methods. The advantages and disadvantages of both are discussed. The authors found the promotion mechanisms in company-wide CI process, which can cause intelligence transfers from CI to absorptive capacity processes.
Details
Keywords
This research explores project manager (PM) behavior in their professional virtual communities (PVCs), using social identity theory as a theoretical foundation. The purpose is to…
Abstract
Purpose
This research explores project manager (PM) behavior in their professional virtual communities (PVCs), using social identity theory as a theoretical foundation. The purpose is to examine the extent to which PMs seek information on key topics in the Project Management Body of Knowledge Guide (PMBoK).
Design/methodology/approach
A text data analytics methodology that uses quantitative and qualitative analysis techniques is followed. The research method reveals relationships in language-based data gathered from six project management forums and blogs.
Findings
Information related to all the PMBoK topics is sought in the project management virtual communities. People management topics account for a dominant portion of interactions. The findings enhance social identification theorizing for the PM role. From a practical standpoint, the findings shed light on focal areas for greater emphasis in PM PVCs.
Originality/value
Our people management finding constructively replicates existing findings via a large, global sample and strengthens calls for increased focus on people management matters in project management. As a result, we call for increased scholarly attention to people management in project management. Finally, we encourage pursuit of several research questions to enhance knowledge of PM information-seeking behavior.
Details
Keywords
Noureddine El Messaoudi, Mohammed El Khomri, Zahra Goodarzvand Chegini, Abdellah Dbik, Safae Bentahar, Munawar Iqbal, Amane Jada and Abdellah Lacherai
This paper aims to focus on studying the batch desorption of adsorbed crystal violet (CV) from date stones (Phoenix dactylifera), untreated (UDS) and treated using NaOH (TDS).
Abstract
Purpose
This paper aims to focus on studying the batch desorption of adsorbed crystal violet (CV) from date stones (Phoenix dactylifera), untreated (UDS) and treated using NaOH (TDS).
Design/methodology/approach
The process variables such as different desorbing agents, volume and concentration of the desorbing agent, contact time, dye concentration before adsorption and temperature affecting CV desorption from CV-loaded untreated date stones (CV@UDS) and treated adsorbent (CV@TDS) were optimized. The UDS and TDS were regenerated using 0.6 m HCl as eluent.
Findings
The HCl solution was an excellent eluent for the CV desorption from CV@UDS (96.45%) and CV@TDS (98.11%). The second-order model and the Langmuir model well exemplified experimental data with maximum desorption capacities were 63.29 mg g−1 for the CV@UDS and 243.90 mg g−1 for the CV@TDS. The calculated thermodynamic showed that the CV desorption was spontaneous, endothermic and physical. Good regeneration and reusability of UDS and TDS for the CV removal for four consecutive adsorption–desorption cycles.
Practical implications
This study provided a good example of reusing UDS and TDS with NaOH for fast removal of a toxic organic pollutant, CV from the wastewaters.
Originality/value
The use of UDS and TDS with NaOH for the first time for desorption study and their reusability to removing CV from their aqueous solutions.
Details
Keywords
Fabrício Oliveira Leitão, Ely Laureano Paiva and Karim Marini Thomé
The literature has suggested that capabilities have been used to generate performance and competitive advantage, especially in industries with higher technological dynamism in…
Abstract
Purpose
The literature has suggested that capabilities have been used to generate performance and competitive advantage, especially in industries with higher technological dynamism in developed economies. However, knowledge of the topic still needs to be systematically analyzed in agribusiness. Thus, this article fills this gap because it systematically reviews the literature on agribusiness capabilities and performance, classifies and codifies its characteristics, and determines what is known and what gaps there are in the knowledge regarding these subjects.
Design/methodology/approach
A systematic literature review of agribusiness capabilities and performance was conducted based on Cronin et al. (2008) protocol. Thirty-six articles from the WoS and Scopus databases were identified and analyzed.
Findings
This article identified, classified and coded 12 capabilities agribusiness firms employ to improve performance. This article reveals several gaps regarding capabilities and performance in agribusiness, especially emphasizing commodity products, in addition to studies with fruits and vegetables, milk, eggs, meat, agricultural inputs and biofuels. It was also found that higher-order capabilities are more strongly related to performance than lower-order capabilities, that the performance benefits conferred by capabilities are more evident in developing economies, and that the relationship between capabilities and performance is more robust in agribusinesses with lower levels of technological dynamism.
Originality/value
This paper contributes to the debate about agribusiness capabilities and performance in three aspects. First, it systematically reviews the literature on these subjects; second, it classifies and codifies agribusiness capabilities and performance characteristics; third, it provides a research agenda on the theme.
Details
Keywords
Fatima‐Zahra Lamghari Moubarrad and Omar Assobhei
This work evaluates the risk of wastewater in transmitting intestinal helminths to a population living near an urban effluent.
Abstract
Purpose
This work evaluates the risk of wastewater in transmitting intestinal helminths to a population living near an urban effluent.
Design/methodology/approach
This study is a copro‐epidemiological evaluation of the school‐age children of Sidi Daoui, a neighbourhood in the discharge area of the main sewer of the city of El Jadida and a control group from Sidi Moussa, a district far from the discharge area.
Findings
Intestinal helminths are more prevalent among the children of the study group of Sidi Daoui by 43 percent, compared with 20 percent in the control group, mainly caused by ascariasis and hymenolepiasis. Enterobiasis is an intestinal vermin present with similar expansion in both zones. Polyparasitism, which cannot be found in the control group, is 6 percent in the discharge area. A total of 22 percent of helminthiasis cases among these children are attributed to wastewater, in particular ascariasis (17 percent) and hymenolepiasis (11 percent). It was found that boys are the most vulnerable, mostly between the ages of seven to nine.
Originality/value
Provides some useful information concerning the risk of wastewater transmitting intestinal helminths.
Details